1 2

Davies Craig

Davies Craig DC8950 Elec Alloy Water Pump & LCD Controller Kit for 6-8 Cyl Eng

Davies Craig DC8950 Elec Alloy Water Pump & LCD Controller Kit for 6-8 Cyl Eng

DC8950
$403.15 AUD
$403.15 AUD
Sale Sold out
Tax included. Shipping calculated at checkout.
DAVIES CRAIG 115 lpm ELEC ALLOY WATER PUMP & LCD CONTROLLER KIT DC8950 FOR 6-8 Cyl ENG The revolutionary EWP®115 is now available in light weight aluminium bundled with our Digital Controller. Designed with the high-performance pro, sprint, tarmac, circuit and drag racer in mind this rugged Alloy electric water pump has AN-16 internal threads at inlet and outlet for neat, tight, dash fitting applications. All the same exciting features offered on the EWP®115 are here on the street-smart alloy EWP. The LCD EWP® & Fan Digital Controller is scientifically calibrated to manage the flow rate of engine coolant to lock onto a targeted engine temperature.The unique LCD EWP/Fan Digital Controller will manage the operation of your chosen EWP by varying the speed of your pump in response to coolant temperature and manage control of your electric Thermatic Fan, No need for a separate thermal switch. The Controller varies the speed of your EWP looking for, and locking onto your target temp. If the engine temp goes 3 degrees C over the target, the Controller will run your radiator fan until the target temp is restored. And it now does 12 & 24 VoltThis LCD EWP/Fan Digital Controller (Part #8000) is Australian designed and as part of this Australian manufacturing company's continuous improvement program this advanced Digital Controller boasts a suite of enhancements. These include:
  • The prominent blue Liquid Crystal Display screen (pictured)
  • Now suitable for all 12v & 24v electrical systems, with relevant displays
  • Genuine Thermometer, with coolant and targeted/set temp. displays
  • Diagnostic check & warm-up signals
  • Nine (9) targeted/set coolant temperatures, 60C (140F) to 100C (212F)
  • Flashing “EWP” logo signifying water pump in operation
  • Davies Craig Thermatic Fan logo, circulating signifying fan in operation
  • Flashing High & Low Voltage indicators
  • Low & High Temp indicators
  • Audible alarm -
    -if coolant temp doesn't exceed 40ºC (104ºF) within 5 mins of start-up
    -when coolant temperature exceeds 10ºC (50ºF) of set/target
    -when coolant temperature exceeds 100ºC (212ºF)
  • Above Set/Target Temperature indicator accompanies audible alarm
  • Temperature Sensor short & open circuit indicators
  • Automatic time-out, EWP runs for 3 minutes or until engine temp has reduced to -10â—¦C (-14F) below set/targeted temp whichever occurs first.
The updated Davies, Craig LCD EWP/Fan Digital Controller (#8000) as an engine management component has undergone extensive research, development, vehicle and test centre scrutiny.The updated LCD Digital Controller how has two specific functions. This unique Controller will now manage the operation of the EWP by varying the speed of the EWP® in response to the temperature of the engine and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers target temperatures, 60ºC (140°F) 65ºC (150°F) 70C (160°F) 75ºC (165°F) 80ºC (175°F) 85ºC (185°F) 90ºC (195°F) 95ºC (205°F). Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The LCD Digital Controller will now operate the engine's electric fan automatically once the engine has reached +3c above the target temperature. A significant benefit too is the Controller allows the EWP to run on after ignition shutdown to reduce heat soak. It is recommended that engine operational temperatures be checked with manufacturer.The LCD Digital Controller can be used with our EBP however it is not recommended as it will not vary the speed of the pump in response to temperature but rather simply turn the pump on and off once the top end temperature is reached. For a far more economical & appropriate solution, we would recommend Part Number 0401 & 0444 to turn the EBP on and off at your set temp.Note: This controller (Part No. 8000) is set up for negatively earthed systems however with a wiring adjustment, can also handle positive earthed systems.We also sell this part at our retail outlet, we do our best to keep stock quantities onour Ebay listing correct, but to avoid any disappointment,please contact us to ensure it is in stock before pressing buy it now.


Manufacturer Part Number:

View full details

Why shop with Engine Master?

  • Quality Brands

    We only sell quality genuine products - with brand names you can trust, you know that you are getting the best products for your build complete with limited manufacturers warranty

  • Fast & Efficent

    We use a number of great couriers to get your parcel to you ASAP! In a rush? Give us a call and ask about an 'expedited order' or enquire on current ETAs!

  • Zero Regret - Hassle Free Returns

    We accept returns for up to 30 days, our returns are hassle free when following our return guidelines and policies and most items can even come back on our capped price Australia Post returns, making it a cost effective process to send your item back if it's not quite right.

  • Experienced Team

    Our team are all passionate about the Automotive Industry and involved with lots of avenues of Motorsports. We have mechanics, engine builders and die-hard enthusiasts here to answer your questions or give you expert advice for your ride - just give us a call!

1 4

Found a better deal elsewhere?

We try to keep our pricing competitive for all our customers - if you have found a better deal elsewhere, send us an email here and we will do our best to match offers.
(Ensure you include the part number and a link to the competitors price!)